케이블링 산업 현황
Industrial Ethernet vs. 상업
We all know that Ethernet is the de facto physical layer communication protocol for data transmission between devices in a local area or wide area network. It has evolved over the years to deliver higher levels of performance while maintaining backwards compatibility, reliability and relatively low cost, which is why it has maintained its popularity.
2020년 4월 2일
Testing Plug-Terminated Links—Internationally
수평 케이블이 한쪽 종단이 RJ-45 플러그를 장치에 직접 연결하는 MPTL(Modular Plug Ended Link)은 콘센트와 장비 코드를 별도로 설치 하기 어려운 환경인 무선 액세스 지점과 보안 카메라에서 PoE 조명 및 비디오 디스플레이에 이르기까지 다양한 장치를 연결하는 데 점점 더 인기를 끌고 있습니다.
디바이스 연결 옵션으로 ANSI-TIA 568.2-D에서 승인된 MPTL은 미국에서만 인기가 있는 것은 아닙니다. 하지만 여러분 중 일부는 TIA 표준을 따르지 않는 지역과 ISO/IEC 또는 CENELEC 표준에 대한 MPTL 테스트가 가능한지에 대해 질문하셨습니다. 짧은 답은 "아직은 아닙니다" 하지만 MPTL이 제대로 작동하는지 TIA 표준을 따르지 않는 지역에서도 확인할 수 있습니다.
2020년 3월 26일
The Ins and Outs of Third-Party Certification
Likely you’ve noticed that cable, patch cords and connecting hardware from reputable manufacturers are promoted and labeled as third-party certified, verified or listed. Third-party certification is an extremely important part of our industry, giving you peace of mind that your chosen manufacturer has independently determined that their products comply with industry standards.
2020년 3월 20일
Since the last standards update, I represented Fluke Networks and attended the TR42 meeting in New Orleans and the SC25 WG3 meeting in Sydney Australia. The following are some of the highlights worth noting.
2020년 3월 9일
Make Sure Your Cabling Plant is Ready for Wi-Fi 6
Our last post covered the technologies for Wi-Fi 6 and 6E. If you’ve decided that you want some of that good stuff in your network, you need to make sure your cabling plant is ready.
2020년 3월 5일
So You Want to Upgrade to Wi-Fi 6?
In the first of this two-part post, we’ll discuss the new and upcoming Wi-Fi 6 standards and the performance benefits. Our subsequent post will cover how to make sure that your cabling plant is ready.
2020년 2월 27일
산업용 이더넷 케이블 자세히 보기
Last month, we published a blog about the various industrial Ethernet connectors including M-series and some new small form factor connectors like the iX and emerging single-pair Ethernet connectors. But what good is a connector designed to withstand the industrial environment without a cable that offers the same protection?
2020년 2월 20일
산업용 이더넷 케이블 문제 - MICE
Industrial Ethernet is very sensitive to delays caused by dropped or damaged data frames (sometimes called packets). Just a few dropped or damaged packets can cause a machine to shut down. These problems are often intermittent and can be caused by harsh industrial environments.
2020년 2월 13일
BICSI 겨울 컨퍼런스에서 알아보십시오!
Planning to attend the upcoming BICSI Winter Conference & Exhibition on February 9-13 at the Tampa Bay Convention Center in Tampa, FL?
Fluke Networks is offering plenty of educational opportunities to learn all about fiber, Industrial Ethernet and more. And you can stop by the Fluke Networks’ Booth #310 during exhibiting hall hours for hands-on demonstrations and one-on-one time with our experts.
2020년 2월 6일
삽입 손실에 문제가 있었습니까?
Have you ever carefully calculated insertion loss during the design phase and then passed your permanent link testing after installation only to find out that the channel isn’t performing once it went live?
2020년 1월 30일