Setup for Cable Testing - MicroMapper™ Pro

Cable testing with the MicroMapper™ Pro can be easily accomplished by following these setup steps:

단계 1: Press the “SET” button and select the cable type using “UP / DOWN” arrows then hit “RETURN” to select

단계 2: Press “SET” again to exit the menu

단계 3: Connect a cable to the Coax or RJ-45 interface

단계 4: Connect a Remote Identifier to the far end of the cable

단계 5: Press the “TEST” Button

단계 6: if the cable has a bad wiremap, there may be the option to use the “UP / DOWN” arrows to get additional information on the problem.