Blog: Cabling Chronicles | Page 6 | Fluke Networks

블로그

케이블링 산업 현황

2018-9-26

혼합된 생각

케이블링 인프라에 관한 한 모든 미디어와 애플리케이션이 항상 같지 않습니다. 따라서 모든 링크 각각에 대해 미디어 유형과 애플리케이션 관점 모두에서 무엇을 테스트 하는지 아는 것이 중요합니다.

미디어 메들리

2018-9-19

혁신 산업

Last week at the 2018 BICSI Fall Conference in San Antonio, TX, two of Fluke Networks’ solutions were chosen by a panel of top-tier cabling and communications systems specifiers, designers, integrators and managers for making groundbreaking contributions to the structured cabling industry.

2018-9-11

광케이블 극성의 A-B-C

Polarity defines direction of flow, such as the direction of a magnetic field or an electrical current. In fiber optics, it's The A-B-C’s of Fiber Polarity

To properly send data via light signals, a fiber optic link’s transmit signal (Tx) at one end of the cable must match the corresponding receiver (Rx) at the other end.

2018-9-08

다음주 BICSI 가을 컨퍼런스 및 전시회에서 많은 것을 배울 수 있습니다 (CEC 포함)

At the upcoming BICSI Fall Conference & Exhibition on September 9 – 13 at the Henry B. Gonzáles Convention Center, San Antonio, TX, there are plenty of opportunities to learn about the latest technologies, and Fluke Networks is excited to bring you the latest on testing everything from advanced four-pair PoE to passive optical networks (PONs).

How does Your Fiber Design and Installation Stack Up?

2018-9-06

와이어 맵 테스트: 색에 관한 것이 전부는 아닙니다

A wire map test may seem like the most basic test for copper network cabling and therefore one of the least important, but it is actually one of the most critical. And while the pair colors of blue, orange, green and brown might help you pass wire map testing, the test itself really doesn’t care about color at all.

Let’s take a closer look.

What’s It Testing For?

2018-8-15

200 및 400Giga의 길은 이미 포장되고 (통행 중입니다).

The increasing demand for higher bandwidth to support Big Data has driven the need for ever-increasing Ethernet speeds, starting with 10 Gig in 2004 to the introduction in 2010 of 40 Gig with 4 fibers transmitting and 4 fibers receiving at 10 Gbps (40GBASE-SR4) and 100 Gig with 10 fibers transmitting and 10 fibers receiving at 10 Gbps (100GBASE-SR10).

2018-8-08

101 시리즈: 스플라이스를 하느냐 안하느냐

Fiber splicing is a method of connecting two fibers, whereby two fibers are precisely cleaved and then aligned and fused using a fusion splicing machine. The fusion of two fibers is achieved by an electric arc that essentially welds the fibers together. A mass fusion splicer welds 12-fiber together at once and is performed using 12-fiber ribbon cable.

2018-8-02

Troubleshooting Installed Cable with DSX-5000 CableAnalyzer

It felt like a Monday morning when the call, actually an e-mail, came in. “I think my DSX is broken!” As you know, they are really tough machines and, when it looks like the Fluke is wrong, usually it isn’t.

“What makes you think it is broken?” I asked, “How does this failure manifest itself?”

“The tester is failing links that used to pass.”

페이지

 
 
Powered By OneLink